[Nicko]

                                       
With time and use, the headlights of your Ford Ranger can start to lose their initial clarity, becoming cloudy and less effective.

There are several factors contributing to this clouding, including exposure to sunlight, accumulation of dirt and debris, and the natural wear and tear of the Ranger's headlight material.

As a result, what were once crystal-clear, bright headlights may take on a yellowish hue or become completely opaque, reducing their effectiveness and undermining the overall look of the truck.
Beyond the aesthetic issue, these dimmed headlights can also pose safety risks as they don't transmit light as effectively, thereby reducing visibility, especially during nighttime driving.

So, you might ask, can you restore your Ford Ranger's headlights to their initial clarity?

The answer is a resounding yes. There are various techniques and methods that can help to make your dimmed, cloudy headlights look clear and clean once more.

Continue reading to learn about the different headlight cleaning options; you'll surely find a solution that works for you.

How to restore the cloudy headlights of your Ford Ranger?



There are numerous ways to restore the clouded headlights of your Ford Ranger. These include simple home remedies, ready-made DIY solutions, and several professional approaches for those equipped with the right tools.


In this guide, we've arranged the headlight restoration methods from the simplest to the most complex. It all depends on the level of wear and tear, and if one method doesn't yield satisfactory results, you can always try the next one.

DISCLAIMER/NOTE OF CAUTION

When you're attempting to restore the brightness of your headlights, it's essential to exercise caution. Improperly performed procedures carry the risk of damaging or even breaking the Ford Ranger headlight.

If you're uncertain about your capabilities, it's always advisable to hand over the restoration of dimmed headlights to professionals.

Start by Cleaning Your Ford Ranger's Headlights

What items will you need for this:

• Car shampoo;
  
• Bucket of water;
  
• Microfiber towels.
  

Often, what appears to be a clouding of the Ford Ranger's headlights is just accumulated dirt, dust, or other residues.

Before resorting to drastic measures, you should thoroughly wash the truck. This involves using a car-specific foam and cloth. Wet the Ranger's body, apply foam, wipe with a cloth, and rinse off all dirt with water.



When washing the headlights, avoid rubbing them when they're dry. The dust and dirt particles will act like an abrasive and can scratch the headlights.

Shop From Amazon
   

                   

Meguiar’s Gold Class Car Wash - For Father's Day, Give the Gift of a Clean and Glossy Car...
                   
 
               
                   

Chemical Guys CWS_402_64 Mr. Pink Foaming Car Wash Soap (Works with Foam Cannons, Foam Gun...
                   

                   

Adam's Car Wash Shampoo (16 fl. oz) - pH Best Car Wash Soap For Snow Foam Cannon or Gun, C...
                   
 
Shop From Amazon
   
  
                   
           

USANOOKS Microfiber Cleaning Cloth - 12Pcs (16x16 inch) High Performance - 1200 Washes, Ul...
                   

               
                   

AIDEA Microfiber Cleaning Cloths-50 Pack, Premium All-Purpose Car Cloth, Lint Free, Scratc...
                   
  
Removing Bugs from Ford Ranger's Headlights May be Necessary

What items will you need for this:

• Bug and tar remover;
  
• Water;
  
• Rag(s).
  

Tiny bugs and insects can stick to the headlights during drives, leading to a reduction in visibility. These contaminants can be hard to wash off, and you might need specialized cleaning products.

Here's a simple cleaning routine for Ford Ranger headlights: rinse your headlights with water, wipe them with a clean rag, apply the cleaner, and rub it gently over the entire headlight surface (avoiding excessive force to prevent unnecessary damage).

Finally, rinse everything off with a damp rag. This should remove all contaminants.

Shop From Amazon
   

                   

Chemical Guys CWS_104_16 Concentrated Bug and Tar Remover Car Wash Soap (Works with Foam C...
                   
 
                   
           

3D Bug Remover - All Purpose Exterior Cleaner & Degreaser to Wipe Away Bugs on Plastic, Ru...
                   
  
                   
           

Meguiar's G180515 Bug & Tar Remover, 15 Ounces
                   
 
Reviving Ford Ranger's Headlights with Toothpaste

What items will you need for this:

• Toothpaste;
  
• Rag(s);
  
• Napkin(s);
  
• Microfiber cloth.
  

Start by dampening your headlights. Then, give them a quick wipe with a rag, but avoid letting them dry. It's recommended to use a toothpaste that has whitening or plaque-removing properties.



Apply a few drops of toothpaste to a rag and, using circular motions, spread it evenly across the headlight's surface. Let it sit for a while.

Now rinse the toothpaste off your Ford Ranger headlight. Thoroughly dry everything to ensure no stains or toothpaste residues are left behind.

Restoring Ford Ranger's Headlights With Vinegar and Baking Soda

What items will you need for this:

• Baking soda;
  
• Vinegar;
  
• Water;
  
• Rag(s);
  
• Napkin(s)
  
• Glass/ basin or bowl
  

Baking soda and vinegar are versatile, handy tools for a variety of tasks, including restoring clarity to fogged headlights.

Shop From Amazon
   
 
                   

Ultra-Soft Detailing Brush Set, Comfortable Grip and Scratch-Free Cleaning for Exterior, I...
                   
  
                   

TEUOPIOE Auto Interior Dust Brush, Car Detailing Brush, Soft Bristles Detailing Brush Dust...
                   
 
                     

TEUOPIOE Auto Interior Dust Brush, Car Detailing Brush, Soft Bristles Detailing Brush Dust...
                   
Select a suitable container such as a glass, basin, or bowl. Mix soda and vinegar in a ratio of 1:2 or 1:3.

First, dampen the Ford Ranger headlights with a wet rag. Next, wash your headlights with the prepared solution. Finally, make sure to dry them thoroughly to prevent any stains.

Polishing Ford Ranger's Headlights with Plastic Polish

What items will you need for this:

• Plastic polish;
  
• Microfiber cloth;
  
• Rag(s)
  

Optional:

• Angle grinder;
  
• Polishing discs
  

Considering Ford Ranger headlights are made of plastic, using a plastic polish can help restore their clarity. First, clean the headlight, apply the product to a rag, and then proceed with polishing.

If you have access to an angle grinder and know how to use it, this can also be an option. Just make sure to select the appropriate disc and work with caution to prevent any damage to the headlight.

Restoring Ford Ranger's Cloudy Headlights with Sandpaper

What items will you need for this:

• Sandpaper (grain: 1500, 2000, 3000);
  
• Rag(s);
  
• Water;
  
• Polishing product;
  
• Silicon spray;
  
• Clear coat varnish
  

Cleaning Ford Ranger headlights using sandpaper is a more advanced technique requiring a steady hand and patient approach to prevent any undue scratches on your headlights.

CAUTION! If you're uncertain about your capability to handle this process, it's better to avoid it to protect the headlight plastic from potential damage.

The use of sandpaper is beneficial when the exterior surface of the headlight is oxidized, and there's a chance to restore it by eliminating the damaged layer.

Shop From Amazon
   

                   

24PCS Sand Paper Variety Pack Sandpaper 12 Grits Assorted for Wood Metal Sanding, Wet Dry...
                   
   
 
                   

Sanding Sponge, 60 80 120 220 Coarse Medium Fine Grit Sanding Block, Sander Sponges for Dr...
                   
  
                   

Sand Paper, 48 PCS Sandpaper, 120 to 5000 Assorted Grit Sandpaper Sheets, 9 x 3.6 Inch Pre...
                   
 
Before starting with the sandpaper, it's advised to wash off all the grime from the headlight. Use adhesive tape to shield the surrounding area of the headlight, preventing body paint damage during the polishing process.

If feasible, remove the headlight from the Ford Ranger - this allows for thorough polishing from all angles without the fear of damaging the body paint.

Now, get the sandpaper ready. Depending on the condition of the headlight, start with 1500 or 2000 grain sandpaper (If the headlight is too clouded - use 1500 grain, if it's less so - resort to 2000 grain).

NOTE! Rinse the sandpaper before applying it to the Ford Ranger headlight. Meticulously wipe every surface and corner of each headlight. It's crucial to maintain a consistent direction while wiping: move horizontally from left to right or vice versa, not exceeding 4 minutes per headlight.

Repeat the process with the other headlight. Then, move on to the finer, 3000-grain sandpaper. Wet it, and using vertical strokes, carefully wipe each headlight surface and corner (from top to bottom; again, no more than 4 minutes per headlight).

Next, use water to rinse off any abrasive residue and everything scrubbed off the headlights. After this, your headlights should appear clearer and more transparent.

However, this procedure does remove a layer from the headlight, so you'll need to restore it. Here are three methods to do so:

Polishing product - Apply a modest amount to a rag and gently wipe across the headlight;

Silicon spray - Apply an even layer on the headlight;

Clear coat varnish - Apply a thin, uniform layer on the headlight surface.



Revive Your Ford Ranger's Headlights with a Restoration Kit

What items will you need for this:

• Headlight restorer;
  
• Rag(s)
  

It's easy to find a comprehensive Ford Ranger headlight restoration kit at your local auto parts store or supermarket. Typically, these kits include a chemical solution along with all the required rags and abrasives.

Most of the time, you simply have to apply a moderate amount of headlight restorer to your clean headlight, rub gently, and allow it to work its magic. Afterwards, simply rinse off the restorer and admire your brilliantly clear headlights.

When buying a headlight restorer for your Ford Ranger headlights, make sure to read and adhere to the instructions diligently.

Shop From Amazon
 

               
                   

3M Ultra Headlight Restoration Kit, Easy Heavy-Duty Restoration, 39195, 1 Kit, Drill Requi...
                   
  
                   
           

3M Quick and Easy Headlight Restoration Kit, Removes Light Yellowing in 15-Minutes, 39193,...
                   
 
                   

Mothers 07251 NuLens Headlight Renewal Kit, 8 fl. oz.
                   
Leave Your Ford Ranger in the Hands of Professionals

What items will you need for this: Capital.

The most fail-safe method is to entrust the task of headlight polishing to seasoned professionals. Numerous services offer proficient Ford Ranger headlight restoration. It might be an investment, but you can rest assured of the outcome - they have the expertise to rejuvenate even the most deteriorated headlights.

Think About Replacing the Headlight Assembly

What items do you need for this: A new headlight assembly.

Over time, the Ford Ranger headlights might degrade to a point where none of the above measures prove effective.

Besides, other signs of wear may manifest on the headlights, such as cracks, chips, burnt areas (resulting from improperly inserted bulbs overheating and melting the headlight from the inside), or a damaged reflector or lens.

In such cases, it might be more reasonable to bypass restoration efforts and replace the Ford Ranger headlight with a new one. Given the variety of options available in the market, it won't be a challenge to find a suitable one that meets all your requirements.

Shop From Amazon
 

               
           


KarParts360 Compatible With Jeep Grand Cherokee Headlight Assembly 2017 2018 2019 2020 Pas...
                   
 
                   

ACANII - For [HID/Xenon Model Only] 2014-2018 Jeep Cherokee Projector Headlight Headlamp R...
                   

                   

Garage-Pro Headlight Compatible with 2017-2021 Jeep Grand Cherokee Driver Side
 
Potential Issues with Ford Ranger's Headlights

Headlight Fogging

Condensation may accumulate within the Ford Ranger headlight itself, resulting in fogged up headlights, thereby impairing the light's visibility. This typically happens due to a breach in the headlight's seal – water penetrates through the gap or gaps created.



Over time, the water evaporates, leading to fog formation. To rectify this issue, it's necessary to remove the headlight from the Ranger, meticulously dismantle its housing, locate the area causing water ingress, and repair it.

Overheated Headlight

Dimming Ford Ranger headlights may also be due to a faulty light bulb. Improper positioning of the light bulb or overheating during operation could cause the plastic to start melting. This can lead to the unpleasant outcomes previously mentioned.

The remedy to this issue is to either replace the lens on the headlight or swap out the bulb with one that generates less heat or possesses a superior cooling mechanism.

Perhaps There's an Issue with Your Ford Ranger's Headlight Bulbs


If the headlights are clean, not foggy, and free of damage or wear and tear signs, but the illumination is still subpar, then the bulbs could be the problem.

Ford Ranger headlight bulbs may wear out over time, hence the diminished lighting being one of the indicators. The solution in this case would be to replace the old or worn-out bulbs with new ones or consider installing brighter headlight bulbs.

Shop From Amazon
   

                   
               

SEALIGHT 9005/HB3 H11/H9/H8 LED Bulbs Combo, Super Bright Cool White, Plug and Play, Pack...
                   
 
                   

AUXITO Upgraded H11 LED Headlight Bulbs, 100W 20000lm Per Set, 600% Brighter, 6000K Cool W...
                   
  
                   

SEALIGHT H11 LED Bulb 20000 Lumens, 600% Brightness, 6500K Cool White H11/H8/H9 LED Bulbs,...
                    

How to Protect Your Ford Ranger's Headlights?



Dim headlights not only mar the Ford Ranger's appearance but can significantly hinder night-time driving. Due to foggy plastic, focused light gets dispersed on cloudy spots, which undermines road visibility.

To prevent the Ranger's headlights from becoming dull, dim, or yellowish, consider the following:

• Regular headlight cleaning: Occasional headlight cleaning prevents them from losing their fresh and transparent look. Utilize specialized tools and cleaning agents, or leave this task to seasoned professionals.
  
• Parking in shaded areas: Direct, hot sunlight can cause your plastic headlights to turn yellowish. UV rays penetrate the headlight plastic, deteriorating its structure. Park your beloved Ford Ranger in a shaded area or a garage whenever possible.
  

To Wrap Everything Up

Clean and transparent Ford Ranger headlights provide you with efficient and far-reaching road visibility under various conditions. When you notice that your headlights are losing their clarity, it's critical to address the issue promptly.

Applying appropriate cleaning methods and techniques for Ranger headlight maintenance can help restore their usual transparency and clarity, thereby enhancing your driving experience.

If you're unsure about cleaning your Ford Ranger's headlights by yourself, it may be best to entrust this task to professionals. Yes, it may be slightly costlier, but you'll have the confidence that the headlight cleaning-restoring job will be done correctly.