Login at Ranger Forums

                                       
When it comes to vehicle maintenance, it's the minor details that can make a significant difference. One of these often overlooked aspects is the engine's coolant level. Every driver should know the quantity of coolant their vehicle requires. Today, I would like to shed light on a topic that Ford Ranger owners will find helpful. It's a simple question: How much coolant does a Ford Ranger hold?

But first, let's lay the groundwork. The coolant, also known as antifreeze, is a crucial fluid in any vehicle. It helps to regulate the engine's temperature, preventing it from overheating during hot weather or even under heavy loads. The coolant achieves this by absorbing the excess heat from the engine and dissipating it through the radiator.

Engine Coolant Specifications

In the Ford Ranger, the recommended coolant is the Motorcraft® Orange Antifreeze/Coolant, according to the vehicle's service guide. This coolant complies with the specification WSS-M97B44-D. This specific antifreeze/coolant has been designed to ensure optimum performance and is crucial for the longevity of your Ford Ranger's engine.



Coolant Capacity

Having the right type of coolant is half the battle; the other half is ensuring the right amount of coolant is in the system. You may be surprised to learn that the Ford Ranger's coolant capacity can differ based on the vehicle's engine variant.

For a 2.5L Duratec Ford Ranger, the coolant capacity is 3.0 gallons (11.5 Liters). It's the same amount for a 2.2L Duratorq-TDCi (MT82) variant. However, if your Ranger model comes with a 2.2L Duratorq-TDCi (AT) engine, the capacity increases slightly to 3.1 gallons (11.9 Liters).

The vehicle with the highest coolant requirement is the 3.2L Duratorq-TDCi variant, necessitating a whopping 3.6 gallons (13.5 Liters) of Motorcraft® Orange Antifreeze/Coolant.

Engine Variant
Coolant Capacity


2.5L Duratec
3.0 gal (11.5 L)


2.2L Duratorq-TDCi (MT82)
3.0 gal (11.5 L)


2.2L Duratorq-TDCi (AT)
3.1 gal (11.9 L)


3.2L Duratorq-TDCi
3.6 gal (13.5 L)

Checking and Topping Up the Coolant

Checking your Ford Ranger's coolant level is a task you can easily carry out at home. All you need to do is locate the coolant reservoir, which is typically translucent, allowing you to see the level of the fluid inside. Ideally, it should be between the MIN and MAX markings on the reservoir.

When topping up the coolant, remember to mix it with water in the right ratio as recommended by the manufacturer, unless you've bought pre-mixed coolant. Also, it's worth mentioning that adding coolant to a hot engine can be dangerous due to the heat and pressure build-up, so always ensure the engine has sufficiently cooled down before attempting to top up the coolant.

Final Thoughts

Taking good care of your Ford Ranger means paying attention to every single detail, including something as simple as the engine coolant. By ensuring you always have the correct type and amount of coolant, you can help your Ford Ranger's engine run efficiently, prolonging its lifespan and saving you from potential costly repairs in the future. So, don't wait for the temperature gauge to hit red or for your engine to start smoking. Regularly check your coolant level, and top up if necessary.

Remember, when it comes to your vehicle's health, the devil is always in the details. Happy driving!