Login at Ranger Forums

                                      
Refueling and changing the oil or brake fluid are usual rituals in the life of every Ford Ranger driver. Less often arises the question of how often the coolant needs to be changed.

Replacing this fluid on time protects your Ranger’s engine from overheating - an extremely dangerous malfunction, the trouble of which lies in the fact that it can also occur on a congested highway.

To prevent this from happening, let's figure out together how often you need to change the coolant on Ranger and how to do it correctly.

Possible Consequences of Untimely Ford Ranger Coolant  Replacement

This information will be beneficial for both beginners and seasoned drivers.

Coolant acts as a refrigerant in the Ford Ranger. Its primary function is to remove heat from the internal combustion engine. The standard motor heating temperature ranges from 85–90 °C. The slightest excess can result in issues like:

• increased fuel consumption;
  
• loss of motor power;
  
• expansion of the cylinder body;
  
• deformation of piston rings;
  
• oil entering the exhaust system, and more.
  

All these factors can lead to wear of the Ranger’s motor components, decreasing their longevity and potentially causing unexpected stops.

To prevent such situations, you need a reliable coolant. It plays a pivotal role in the Ranger's cooling system.

Another potential risk of not refilling the coolant in time is engine corrosion. Over time, contaminants like dust, combustion residues, silicates, and others accumulate in the coolant.

As a result, the fluid might take on a rusty appearance and can corrode metal engine components upon contact. This corrosion reduces thermal conductivity, affects heat transfer, and radiator functions, often resulting in overheating and engine wear.

What Are The Main Symptoms Of Coolant Misuse on Ranger?

Cavitation erosion is a significant concern with improper coolant usage.

Cavitation is best illustrated by the boiling of a kettle. The buzzing it produces is due to bubble collapse.

How does this affect the Ford Ranger and its cooling system? When these bubbles collapse near metal surfaces over extended periods, they can erode the metal.

Over time, these small indentations can deepen. If not addressed promptly, cavitation might even produce holes in metal components.

Regularly changing your vehicle's coolant, particularly if it contains special additives, can help prevent these issues. Accumulation of water in the coolant can lead to crack formation.

Some cracks can be significantly large, resulting in leaks. Timely coolant monitoring and replacement can help you steer clear of these problems.

How Often Do I Need To Change The Coolant In Ford Ranger?

The coolant replacement frequency varies based on the Ford Ranger's model year, age, and mileage.

Typically, the fluid should be changed after the initial 60,000 miles (or 4 years). Following that, it's advised to replace the coolant every 30,000 miles (or 2 years).

Always ensure the coolant level remains between the "min" and "max" indicators. If it drops to the minimum, it's time for a replacement.

A noticeable change in the coolant's color or visible impurities on the fluid's surface also indicates the need for a change.

Your choice of coolant and driving conditions can also influence the frequency of changes in the Ford Ranger.

How To Change The Coolant In Ford Ranger?

Before embarking on this task, always consult your Ford Ranger's owner's manual.
Items you'll need:

• New coolant;
  
• Drain container;
  
• Pair of cloth gloves;
  
• Floor jack;
  
• A set of sockets or spanners;
  
• Screwdrivers (Phillips and flathead);
  
• Pliers.
  

Shop From Amazon
   

                   

Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   

                   

Zerex G05 Phosphate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   

                   

Zerex Asian Vehicle Blue Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze...
                   
Now, let's walk through the steps for the coolant change:

• Park the Ford Ranger on a flat surface and engage the parking brake (for manual transmissions, shift it into first);
  
• If the truck was running, give it 20-30 minutes to cool down;
  
• Lift the hood. Find the expansion tank (usually a plastic reservoir containing fluid, but check the manual to be certain);
  
• Twist the tank cap counterclockwise, let any pressure release, then remove it entirely;
  
• Use the floor jack to elevate the truck's front end slightly;
  
• Remove any undercarriage guards (if present);
  
• Position the container beneath the radiator and open the drain valve (refer to your manual for its location).
  

Note: Some Ford Ranger versions might have a hose instead of a drain valve. If so, you'll need to disconnect it to let the coolant out.

• Flush the system thoroughly to ensure all the old coolant is gone;
  
• Many vehicles have a bleed screw to help release trapped air and drain residual coolant;
  
• Once fully drained, seal the drain tap (or reattach the hose);
  
• Examine the radiator hoses. Ensure they're in prime condition;
  

• Identify and remove the reserve tank to drain any leftover coolant. Reinstall the tank afterward;
  
• Open the expansion tank filler cap. Add a couple of liters of water to prevent airlock. Ensure the bleed screw is open if your vehicle has one;
  
• Add the required amount of coolant. Then add a tad more water;
  
• Periodically squeeze the top and bottom radiator hoses to push out any trapped air;
  
• Continue filling with coolant until it starts spilling from the bleed screw. Close the screw once this happens;
  
• Fill the coolant up to the “max” mark and reattach the expansion tank cap;
  
• Double-check the bleed screw for tightness. Remove your drain container;
  
• Fire up the engine, letting it idle for around 5 minutes. Wait for the cooling fan to kick in. During this time, rev the engine between 2000 to 3000 rpm;
  
• Turn off the engine and wait 20 minutes. Conduct a thorough inspection for potential leaks. Don't forget to verify the coolant level.
  

Note: After refreshing the coolant in your Ford Ranger, take it for a spin. Recheck the coolant level with a cold engine, and top off if required.

Signs That It's Time To Refresh The Coolant In Your Ford Ranger



Similar to inspecting your oil or brake fluid, keeping tabs on your Ford Ranger's coolant level is essential. Neglecting this can lead to visible signs:

Rapid overheating. This is a clear red flag, indicating the need for a coolant change or a mechanic's inspection;
Fluid leakage. This suggests potential issues with the seals, especially around the radiator hoses;
Sweet aroma. A sugary scent while driving indicates possible coolant problems;
Persistent coolant level drop. Should you notice this, inspect your Ford Ranger's coolant tank. Dropping levels might be due to cracks in the hoses. If suspected, consult with a mechanic.

Handy Pointers When Changing Coolant In A Ford Ranger

It's always beneficial to grasp the nuances and quirks, even with something as mundane as coolant. With this knowledge, you're better equipped to avoid potential pitfalls for both yourself and your Ford Ranger.

Avoid checking or replacing coolant with a hot engine. A sudden overflow can cause burns. Plus, when hot, coolant expands, potentially skewing the true level.

Regularly flushing and refilling the coolant as required can enhance both the coolant's efficacy and the performance of the Ford Ranger.



If the coolant diminishes before the recommended interval, consider a thorough checkup. There might be an unnoticed leak.

Always opt for the coolant suggested by the manufacturer. Different coolants have varied compositions, some of which might not be compatible with your Ford Ranger.

If the coolant appears murky or changes in consistency, consult a mechanic. This could suggest a much larger issue at hand.

Last but not least, always be environmentally friendly. Drain the old coolant into a container and dispose of it responsibly at a recycling center or auto parts store.

In conclusion, maintaining your Ford Ranger's coolant is a vital part of ensuring its performance and longevity. Regular checks and replacements ensure that your engine remains cool and efficient, guaranteeing smooth rides.