08-29-2024, 11:38 AM
Hey folks, I’m dealing with a bit of an annoyance on my 2009 Ford Ranger with the 3.0L V6. The cruise control has decided to take an extended vacation, and it’s driving me crazy on my long commutes. Here’s what’s happening: I try to engage the cruise control, and there’s just... nothing. No light, no response—like it’s not even there.
So far, I’ve checked the basics:
Despite these checks, the cruise control still refuses to work. I’m hoping it’s not the control module itself because I’d rather avoid an expensive repair if possible. Before I take it to the shop, does anyone have any ideas or tips on what else I should check? Maybe something I’ve overlooked? Any help would be much appreciated!
So far, I’ve checked the basics:
- Brake Pedal Switch: I made sure the brake lights aren’t stuck on, which could be sending a signal to the system that the brakes are engaged, but everything looks normal there.
- Fuses: I’ve gone through the fuse box and checked the fuses related to the cruise control. All seem intact—no blown fuses.
- Wiring: I did a quick visual inspection of the wiring around the steering column, looking for anything obvious like loose or frayed wires, but didn’t spot anything out of place.
Despite these checks, the cruise control still refuses to work. I’m hoping it’s not the control module itself because I’d rather avoid an expensive repair if possible. Before I take it to the shop, does anyone have any ideas or tips on what else I should check? Maybe something I’ve overlooked? Any help would be much appreciated!