[Nicko]

How Often Do I Need To Change The Coolant In Ford Ranger?

The coolant replacement frequency varies based on the Ford Ranger's model year, age, and mileage.

Typically, the fluid should be changed after the initial 60,000 miles (or 4 years). Following that, it's advised to replace the coolant every 30,000 miles (or 2 years).

Always ensure the coolant level remains between the "min" and "max" indicators. If it drops to the minimum, it's time for a replacement.

A noticeable change in the coolant's color or visible impurities on the fluid's surface also indicates the need for a change.

Your choice of coolant and driving conditions can also influence the frequency of changes in the Ford Ranger.

How To Change The Coolant In Ford Ranger?

Before embarking on this task, always consult your Ford Ranger's owner's manual.
Items you'll need:

• New coolant;
  
• Drain container;
  
• Pair of cloth gloves;
  
• Floor jack;
  
• A set of sockets or spanners;
  
• Screwdrivers (Phillips and flathead);
  
• Pliers.
  

Shop From Amazon
   

                   

Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   

                   

Zerex G05 Phosphate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   

                   

Zerex Asian Vehicle Blue Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze...
                   
Now, let's walk through the steps for the coolant change:

• Park the Ford Ranger on a flat surface and engage the parking brake (for manual transmissions, shift it into first);
  
• If the truck was running, give it 20-30 minutes to cool down;
  
• Lift the hood. Find the expansion tank (usually a plastic reservoir containing fluid, but check the manual to be certain);
  
• Twist the tank cap counterclockwise, let any pressure release, then remove it entirely;
  
• Use the floor jack to elevate the truck's front end slightly;
  
• Remove any undercarriage guards (if present);
  
• Position the container beneath the radiator and open the drain valve (refer to your manual for its location).
  

Note: Some Ford Ranger versions might have a hose instead of a drain valve. If so, you'll need to disconnect it to let the coolant out.