11-04-2024, 02:35 PM
Note on Oil Addition
In an emergency, if you can't find the specified oil, use SAE 5W-20 or SAE 5W-30 that meets ACEA A5/B5 standards. But remember, don't exceed 1 L (0.2 gal) between service intervals.
Coolant Capacity and Maintenance
![[Image: 667860dd04476bb98aad675767defb50c1b.jpg]](https://towingcap.com/uploads/66/78/667860dd04476bb98aad675767defb50c1b.jpg)
Check the Coolant Level
The coolant level is a vital aspect of your vehicle’s health. It should always be between the MIN and MAX marks on the reservoir. If it's not, you need to act fast!
Adding Coolant: Step-by-Step
Coolant Type and Emergency Measures
In emergencies, you can add water to reach a service location, but this is a temporary fix. Long-term use of incorrect coolant mix can damage your engine.
Professional Check-up
Once you reach a service location, it's crucial to get the cooling system drained, cleaned, and refilled with the correct coolant.
Item
Capacity
Details/Specification
Engine Oil (with filter)
5 L (1.1 gal)
-
Engine Oil (without filter)
4.6 L (1.0 gal)
-
Engine Coolant
6.8 L (1.5 gal)
-
Fuel Tank
60 L (13.2 gal)
-
Washer System
5.7 L (1.3 gal)
-
Adding Engine Oil
0.9 L (0.2 gal)
To raise oil level from min to max
Engine Oil Specification
-
Ford-Castrol Magnatec (WSS-M2C948-B/D)
Antifreeze Specification
-
Super Plus Premium (WSS-M97B44-D)
Brake Fluid Specification
-
DOT 4 LV High Performance (WSS-M6C65-A2)
Screen Wash Specification
-
(WSS-M14P19-A)
Emergency Oil Addition
Use SAE 5W-20/30
If specified oil not available
Max Oil Addition Between Services
1 L (0.2 gal)
-
Conclusion
Owning a Ford Ranger is a responsibility. Understanding and maintaining its coolant capacity and other specifications ensure its longevity and optimal performance. So, keep these insights in mind, and your Ranger will thank you with years of reliable service. Remember, a little knowledge goes a long way in keeping your vehicle in top shape!
In an emergency, if you can't find the specified oil, use SAE 5W-20 or SAE 5W-30 that meets ACEA A5/B5 standards. But remember, don't exceed 1 L (0.2 gal) between service intervals.
Coolant Capacity and Maintenance
Check the Coolant Level
The coolant level is a vital aspect of your vehicle’s health. It should always be between the MIN and MAX marks on the reservoir. If it's not, you need to act fast!
Adding Coolant: Step-by-Step
- Open the Reservoir: Gently remove the filler cap.
- Fill to the Mark: Add coolant up to the MAX mark, but be careful not to overfill.
- Seal It Up: Replace the cap and turn it clockwise until it stops.
Coolant Type and Emergency Measures
In emergencies, you can add water to reach a service location, but this is a temporary fix. Long-term use of incorrect coolant mix can damage your engine.
Professional Check-up
Once you reach a service location, it's crucial to get the cooling system drained, cleaned, and refilled with the correct coolant.
Item
Capacity
Details/Specification
Engine Oil (with filter)
5 L (1.1 gal)
-
Engine Oil (without filter)
4.6 L (1.0 gal)
-
Engine Coolant
6.8 L (1.5 gal)
-
Fuel Tank
60 L (13.2 gal)
-
Washer System
5.7 L (1.3 gal)
-
Adding Engine Oil
0.9 L (0.2 gal)
To raise oil level from min to max
Engine Oil Specification
-
Ford-Castrol Magnatec (WSS-M2C948-B/D)
Antifreeze Specification
-
Super Plus Premium (WSS-M97B44-D)
Brake Fluid Specification
-
DOT 4 LV High Performance (WSS-M6C65-A2)
Screen Wash Specification
-
(WSS-M14P19-A)
Emergency Oil Addition
Use SAE 5W-20/30
If specified oil not available
Max Oil Addition Between Services
1 L (0.2 gal)
-
Conclusion
Owning a Ford Ranger is a responsibility. Understanding and maintaining its coolant capacity and other specifications ensure its longevity and optimal performance. So, keep these insights in mind, and your Ranger will thank you with years of reliable service. Remember, a little knowledge goes a long way in keeping your vehicle in top shape!