[Nicko]

                                       
Understanding the Basics

Capacities at a Glance

• Engine Oil (with filter): 5 L (1.1 gal)
  
• Engine Oil (without filter): 4.6 L (1.0 gal)
  
• Engine Coolant: 6.8 L (1.5 gal)
  
• Fuel Tank: 60 L (13.2 gal)
  
• Washer System: 5.7 L (1.3 gal)
  

These capacities are crucial for any Ford Ranger owner to know. They ensure that your vehicle runs smoothly and efficiently.



Adding Engine Oil

If you find your oil level dipping, remember that it takes about 0.9 L (0.2 gal) to raise it from minimum to maximum. This is essential for maintaining the engine's health.

Dive into Specifications

Use the Right Materials

Shop From Amazon
   

                   

Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   
  
                   


Zerex G05 Phosphate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
                   
Your Ford Ranger is not just any vehicle; it requires specific materials to function at its best:

• Engine Oil: Ford-Castrol Magnatec (WSS-M2C948-B or WSS-M2C913-D)
  
• Antifreeze: Super Plus Premium (WSS-M97B44-D)
  
• Brake Fluid: DOT 4 LV High Performance (WSS-M6C65-A2)
  
• Screen Wash: (WSS-M14P19-A)
  

Using the recommended materials ensures your Ranger's longevity and performance. Ford and Castrol have teamed up to provide the best for your engine.

[Nicko]

Note on Oil Addition

In an emergency, if you can't find the specified oil, use SAE 5W-20 or SAE 5W-30 that meets ACEA A5/B5 standards. But remember, don't exceed 1 L (0.2 gal) between service intervals.

Coolant Capacity and Maintenance



Check the Coolant Level

The coolant level is a vital aspect of your vehicle’s health. It should always be between the MIN and MAX marks on the reservoir. If it's not, you need to act fast!

Adding Coolant: Step-by-Step

1. Open the Reservoir: Gently remove the filler cap.
   
2. Fill to the Mark: Add coolant up to the MAX mark, but be careful not to overfill.
   
3. Seal It Up: Replace the cap and turn it clockwise until it stops.
   

Coolant Type and Emergency Measures

In emergencies, you can add water to reach a service location, but this is a temporary fix. Long-term use of incorrect coolant mix can damage your engine.

Professional Check-up

Once you reach a service location, it's crucial to get the cooling system drained, cleaned, and refilled with the correct coolant.

Item
Capacity
Details/Specification

Engine Oil (with filter)
5 L (1.1 gal)
-

Engine Oil (without filter)
4.6 L (1.0 gal)
-

Engine Coolant
6.8 L (1.5 gal)
-

Fuel Tank
60 L (13.2 gal)
-

Washer System
5.7 L (1.3 gal)
-

Adding Engine Oil
0.9 L (0.2 gal)
To raise oil level from min to max

Engine Oil Specification
-
Ford-Castrol Magnatec (WSS-M2C948-B/D)

Antifreeze Specification
-
Super Plus Premium (WSS-M97B44-D)

Brake Fluid Specification
-
DOT 4 LV High Performance (WSS-M6C65-A2)

Screen Wash Specification
-
(WSS-M14P19-A)

Emergency Oil Addition
Use SAE 5W-20/30
If specified oil not available


Max Oil Addition Between Services
1 L (0.2 gal)
-
Conclusion

Owning a Ford Ranger is a responsibility. Understanding and maintaining its coolant capacity and other specifications ensure its longevity and optimal performance. So, keep these insights in mind, and your Ranger will thank you with years of reliable service. Remember, a little knowledge goes a long way in keeping your vehicle in top shape!