Capacity and Type
For the Ford Ranger 3.0L EcoBoost, the total coolant capacity is 10.7 liters. It’s essential to use a specific type of coolant: Antifreeze WSS-M97B57-A2. This yellow coolant, which may appear fluorescent green, is crucial for the health of your engine.
Warnings and Recommendations:
- Do Not Mix Coolants: Mixing different coolants can reduce their effectiveness and void your vehicle warranty.
- Use Specified Coolant Only: Using non-specified coolants can cause engine damage not covered under warranty.
Checking and Maintaining the Coolant Level
Routine Checks
When the engine is cold, regularly check the coolant concentration and level. Ensure it’s between the minimum and maximum marks on the reservoir.
Adding Coolant
Precautions:
- Safety First: Never open the coolant reservoir when the engine is hot. Wait at least 10 minutes after turning off the engine.
- Correct Concentration: Maintain a coolant concentration of 48% to 50%. This equates to a freeze point between -34 °C and -37 °C. A refractometer is recommended for accuracy.
- Filling to the Right Level: Do not fill past the MAX mark on the reservoir.
What if You Need to Add Coolant?
If you find the coolant level below the minimum mark, add prediluted coolant immediately. If adding more than 1 liter per month, it's advisable to have your vehicle checked for potential leaks or issues.
In Case of Emergency
In emergencies, you can add water to reach a service location, but this is a temporary solution. Water alone can cause engine damage.
Shop From Amazon
Valvoline Multi-Vehicle 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
Zerex G05 Phosphate Free 50/50 Prediluted Ready-to-Use Antifreeze/Coolant 1 GA
Zerex Asian Vehicle Blue Silicate and Borate Free 50/50 Prediluted Ready-to-Use Antifreeze...
Coolant for Severe Climates
Extreme Cold
In very cold climates, increasing the coolant concentration above 50% may be necessary, up to 60% for better freeze protection. However, concentrations above 60% can reduce overheat protection and potentially cause engine damage.
Extreme Heat
Conversely, in hot climates, decreasing the coolant concentration to 40% might be advisable for better overheat protection. Remember, concentrations below 40% decrease both overheat and corrosion protection.
Changing the Coolant
The coolant should be changed at specific intervals, as per the scheduled maintenance information. Always dispose of the old coolant responsibly, adhering to community regulations.
Understanding Fail-Safe Cooling
The Ford Ranger 3.0L EcoBoost comes with a fail-safe cooling feature that allows limited driving to prevent incremental engine damage under certain conditions. However, it's meant for emergencies only and should not be relied upon for regular driving.
Aspect
Details
Coolant Capacity
10.7 liters
Recommended Coolant Type
Antifreeze WSS-M97B57-A2 (Yellow coolant)
Coolant Checking Interval
Regularly when engine is cold
Coolant Concentration
48% to 50% (Freeze point between -34 °C and -37 °C)
Adding Coolant
Add prediluted coolant, not beyond MAX mark
Safety Precautions
Do not open when hot; Wait 10 minutes after engine is off
Coolant for Cold Climates
Up to 60% concentration for better freeze protection
Coolant for Hot Climates
40% concentration for better overheat protection
Coolant Change Interval
Follow scheduled maintenance information
Fail-Safe Cooling
Limited operation in emergencies to prevent engine damage
Emergency Measures
Temporary use of water in emergencies; service vehicle ASAP
Conclusion
Proper coolant maintenance is essential for the health and longevity of your Ford Ranger's engine. Remember, it's not just about quantity but also about using the right type and maintaining it responsibly. Stay on top of your coolant levels, and your Ranger will thank you with consistent and reliable performance.